User's Manual
Table Of Contents
- Front Matter
- Quick Start Guide
- Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Setup
- Chapter 3 Operation
- Chapter 4 Configuration
- Chapter 5 Setup Menu
- Chapter 6 Troubleshooting and Diagnostics
- Appendix A Interface Specifications and Cable Diagrams
- Appendix B Boot Manager
- Appendix C SNMP Management
- Appendix D Glossary
- DC Power Supply Connection
- Customer Response Form
Chapter 5 Setup Menu FCD-IPM Installation and Operation Manual
5-2 Host Parameters Menu
5.1 Host Parameters Menu
Select this option to enter reference information about the device, the IP Host, the
SNMP agent and TFTP.
2
Device Control
1
Setup
Advanced Menu
3
SNMP Manager
Table
1. Manager Table
2
IP Host
1. IP Address
2. IP Mask
3. Default Gateway
4
TFTP
5
RADIUS
1. RADIUS Server
IP Address
2. RADIUS
Authenticator
3. RADIUS Accounting
Status
4. RADIUS
Authentication Port
5. RADIUS Accounting
Port
6. Retransmission
Timeout
7. Total Timeout
1
Device ID
1. Device Name
2. Contact Person
4. MAC Address
3. System Location
Host Parameters
1
1. Retransmitting
Timeout
2. Total Timeout
Figure 5-3. Host Parameters Menu Outline
To access the Host Parameters menu:
1. In the Advanced Menu, press 1.
The Setup menu appears.
2. In the Setup menu, press 1.
The Host Parameters menu appears (refer to Figure 5-3).