Specifications

Optimux-106 Ver. 6.1 Configuring Optimux-106 for Management 4-1
Chapter 4
Configuration
4.1 Configuring Optimux-106 for Management
A terminal allows you to:
• Set management parameters
• Set user name and password
• Mask channel and uplink alarms
• Set the redundancy mode of the uplink interface and the active link
• Reset Optimux-106 to the default configuration (removing loops and
switching to the normal redundancy mode).
Setting the Device Information
Each Optimux-106 unit can be configured to hold information about the unit,
such as its location and a name to easily identify the unit on the network.
³ To set Device Information:
1. From Main menu, select Configuration>System>Management>Device
Information.
Optimux-106
Configuration>System>Management>Device Information
Description ... (OP-106 HW Version:0.01/A, SW Version:6.10)
1. Name ... (Optimux-106)
2. Location ... (The location of this device)
3. Contact ... (Name of contact person)
>
Please select item <1 to 3>
ESC-Previous menu; !-Main Menu; &-Exit 1 User(s)
Figure 4-1. Device Information Screen
2. From the Device Information screen, set Optimux-106 parameters.
Table 4-1. Device Information
Parameter Description
Description Identifies the device, with current hardware and software
version numbers