Specifications

Installation and Operation Manual Chapter 4 Configuration
Optimux-106 Ver. 6.1 Configuring Optimux-106 for Operation 4-11
Parameter Possible Value Description
Line Length (ft) 1. 0-133
2. 134-266
3. 267-399
4. 400-533
5. 534-655
Identifies the T1 Channel line length
Alarms Masked
Unmasked
Identifies whether alarms triggered by this
port are masked or not. When masked,
these alarms are not trapped and are not
recorded in the log file.
Configuring Uplink Parameters
The following menu is used to configure the uplinks.
Optimux-106
Main Menu>Configuration>Physical Layer>Link
1. Device Number > (Local)
2. Port number > (LINK A)
3. Port Name ... ()
4. Alarms > (Unmasked)
>
Please select item <1 to 4>
ESC-Previous menu; !-Main Menu; &-Exit 1 User(s)
Figure 4-15. Link Menu
Table
4-10. Uplink Parameters
Parameter Possible Value Description
Device Number Local
Remote
Identifies whether parameters shown
are for the local or remote device.
Port number LINK A or LINK B Identifies the uplink port to configure.
Port Name String of up to 15 characters
Default
A name to easily identify this uplink
port.
Alarms Masked
Unmasked
Identifies whether alarms triggered by
this port are masked or not. When
masked, these alarms are not trapped
and are not recorded in the log file.