Specifications

Installation and Operation Manual Chapter 4 Configuration
Optimux-106 Ver. 6.1 Performing Additional Tasks 4-15
Resetting Optimux-106
³ To reset Optimux-106:
1. From the Main Menu, choose Utilities > Reset.
A confirmation message is displayed.
2. Enter Y (Yes) to reset the device.
Terminal Management Modes
The use of a terminal is optional for configuration, monitoring, and maintenance
operations.
The Optimux-106 provides the following terminal management modes:
• Monitor – A supervisory ASCII ANSI terminal or a PC emulating an ASCII ANSI
terminal connected directly to the Optimux-106 CONTROL port.
• Ethernet – A PC running terminal emulation software or a management
workstation, connected to the Optimux-106 via an Ethernet cable. It must be
possible to activate Telnet and Web access after setting the IP address.
Up to three users can be active simultaneously, one connected to the terminal
and two via Telnet or Web. When connected via Telnet or Web, the user is
disconnected after 10 minutes of inactivity (no keyboard input on the client
computer).
Optimux-106 supports several management information bases (MIBs). Refer to
Appendix B for details.