Specifications

Chapter 5 Monitoring and Diagnostics Installation and Operation Manual
5-4 Monitoring Performance Optimux-106 Ver. 6.1
Monitoring the Physical Ports
You can monitor the following aspects of the physical ports on the Optimux-106:
• Management port status
• Uplink status
• Channel status.
Monitoring the Status of the Ethernet Port
The Ethernet Status Screen displays the current status of the local or remote
Ethernet port.
To display the status of the Ethernet port:
1. From the Monitoring menu, select Physical Layer> Ethernet.
The Ethernet screen is displayed.
Optimux-106
Monitoring>Physical Layer>Ethernet
1. Port number > (MNG-ETH)
Operation > (Up)
Auto negotiation Status > (Completed)
Speed & Duplex > (100Mbps Full Duplex)
Alarm > (Unmasked)
>
Please select item <1 to 1>
ESC-Previous menu; !-Main Menu; &-Exit 1 User(s)
Figure 5-4. MNG-ETH Status Screen
Table
5-3. MNG-ETH Status Parameters
Parameter Possible Values Description
Operation Up
Down
Indicates the current operational
status of the device.
Autonegotiation Status Completed Indicates the current status of
autonegotiation.
Speed & Duplex 100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
Indicates the speed and duplexity
configured for the Ethernet port.
Alarm Masked
Unmasked
Identifies whether alarms on the
device are masked or not. When
masked, Ethernet alarms are not
trapped.
2. To see the ETH-USER status, select 2.