Specifications

Installation and Operation Manual Chapter 5 Monitoring and Diagnostics
Optimux-106 Ver. 6.1 Performing Diagnostic Tests 5-17
Optimux-106
Monitoring>System>Event Log
Source Alarm Status Severity
1 Local Device Remote connection fail ON MAJOR
2 Local MNG-ETH ETH Integrity fail ON MAJOR
| 3 Local USER-ETH ETH Integrity fail ON MAJOR
v 4 Local Device Redundancy not available ON MAJOR
5 Local Ch-1 Signal Loss ON MAJOR
6 Local Ch-2 Signal Loss ON MAJOR
7 Local Ch-3 Signal Loss ON MAJOR
8 Local Ch-4 Signal Loss ON MAJOR
9 Local Device Cold Start NA EVENT
10 Local Device Local login NA EVENT
->>
>
ESC-prev.menu; !-main menu; &-exit; ?-help 1 user(s)
Figure 5-16. Event Log Screen
Table
5-12. Event Log Screen Fields
Field Description
Source The source that generated the event. Possible values are described in
Table 5-6 .
Alarm A description of the event.
Status Status of the event:
Off – event for which no trap is sent.
ON – event for which trap is sent.
Severity Indicated the severity of the relevant alarm
MINOR- Minor alarm
MAJOR- Major alarm
Clearing the System Log File
³ To clear the event log:
1. In the System Screen (
Figure 5-16 ), choose 5.
A confirmation message appears.
2. Enter Yes to clear the event log buffer.