Specifications

Chapter 7 Configuring a Typical Application Installation and Operation Manual

7-2 Configuring the System Parameters Optimux-106 Ver. 6.1

³ To enter user name and password:

1. Type in you user name.

Enter su or SU for full configuration and monitoring access.

2. Type in your password at the > prompt (up to eight characters).

Optimux-106 responds to your entry with asterisks.

The default password is 1234.

3. Press <Enter>.

The Main menu is displayed.

7.2 Configuring the System Parameters

³ To configure the Optimux-106 system parameters:

1. Configure the Ethernet port (Main Menu>Configuration>Physical Layer>

Ethernet).

2. Configure the channel type for each of the T1 ports (Main Menu>

Configuration>Physical Layer>T1).

3. Configure the Uplinks (Main Menu>Configuration>Physical Layer>Link).

4. Configure the Masking of the System Alarms (Configuration>System>Alarms).

Note