System information

IPmux-8/16 User’s Manual Chapter 3 Configuration Management
Configuring General Parameters 3-15
Configuring the VLAN Table of the Ethernet Switch
The VLAN Table > Bridge 1/2 command enables you to establish virtual LANs
(VLANs) to segment your network into multiple smaller networks. You can use
VLANs to reduce traffic on each network segment and to increase security.
 To view the VLAN table:
1. Configuration > VLAN Table > Bridge 1... (or Bridge 2….)
The Bridge 1 (or 2) VLAN Table dialog box appears.
Figure 3-12. Bridge 1 VLAN Table Dialog Box
Table 3-8. Bridge 1 VLAN Table Parameters
Parameter Possible Values / Remarks
VLAN ID 1..4094
Port 1 Member
Not Member
Port 2 Member
Not Member
Port 3 Member
Not Member
Port 4 Member
Not Member
Bridge 1 exists only if there is a card in Slot 1.
Bridge 2 exists only if there is a card in Slot 2.
Note