System information

IPmux-8/16 User’s Manual Chapter 3 Configuration Management
Configuring IPmux-8/16 Ports at the Physical Layer 3-17
Figure 3-14. VLAN Table – Change VLAN Dialog Box
 To remove a VLAN from the VLAN Table:
1. Select the row of the VLAN to be removed.
2. Click Remove.
The VLAN is removed from the VLAN Table.
3.3 Configuring IPmux-8/16 Ports at the Physical Layer
At port level, you can configure parameters for:
• Ethernet ports
• E1/T1 ports
• E3/T3 ports.
Configuring Ethernet Parameters
 To set configuration parameters for the Ethernet interface:
1. Click the Ethernet port.
2. Configuration > Parameters...
The Interface Parameters dialog box appears.