System information

Chapter 3 Configuration Management IPmux-8/16 User’s Manual
3-26 Configuring IPmux-8/16 Ports at the Physical Layer
Configuring CT3 Parameters
 To display or configure CT3 parameters:
1. Click a CT3 port.
2. Configuration > Parameters...
The CT3 Parameters dialog box appears.
Figure 3-20. CT3 Parameters Dialog Box
Table 3-13. CT3 Interface Parameters
Parameter Possible Values / Remarks
Slot 3, 4
Port Channelized T3
Type CT3
Suppress Port Indication Defines whether Agent will mask port's alarms and statistics or not
Unchecked
(don’t mask), Checked (masked)
Line Type Indicates the variety of DS3 C-bit or E3 application implementing this
interface. The type of interface affects the interpretation of the usage and
error statistics.
The rate of DS3 is 44.736 Mbps and E3 is 34.368 Mbps. The
dsx3ClearChannel value means that the C-bits are not used except for
sending/receiving AIS.
C-Bit: ANSI T1.107-1988 [9]
M13: ANSI T1.107a-1990 [9a]
Transmit AIS Enables/disables AIS transmit when Ethernet cable (for TDMoIP) is out
(disconnected)
Enabled, Disabled