System information

Chapter 3 Configuration Management IPmux-8/16 User’s Manual
3-32 Managing Bundle Connections
Table 3-16. Bundle Connection Table Parameters (Cont.)
Parameter Possible Values/Remarks
Dest. Bundle Bundle number in the destination IPmux device
For E1: 1 to 496
For T1: 1 to 384
Jitter Buffer (tens of
µsec
Depth of the jitter buffer (elastic buffer per link whose size is configurable in units
of 10 micro seconds (µs).
T1: 0..3.. 2400 (0 - 24 ms)
E1: 0..3..3200 (0 - 32 ms)
T3/E3: 0..3..2400 (0 - 24 ms)
Default (for both E1 and T1) 300
TOS 0 to 255
TDM Bytes in Frame E1/T1:
48..1440 (steps of 48)
Note: List of values differs for different interfaces
E3/T3:
240..1440 (steps of 48)
VLAN Tagging Select this checkbox to enable VLAN tagging
Note: Trying to activate the VLAN Tagging function in an unsuitable environment
causes NMS disconnection
VLAN ID 1 to 4094
Appears only when VLAN Tagging is enabled
VLAN Priority 0 to 7
Appears only when VLAN Tagging is enabled
OAM Connectivity Disabled, Enabled
Bundle Throughput
(kbps)
Amount of data transferred per second, per bundle
LAN1 Usage (%) Current system performance on LAN1
LAN2 Usage (%) Current system performance on LAN2
Note: This field exists only when the LAN2 card exists.
LAN1 Total
Throughput (Kbps)
Amount of data transferred per second, on LAN1
LAN2 Total
Throughput (Kbps)
Amount of data transferred per second, on LAN2.
Note: This field exists only when the LAN2 card exists.
The Bundle Usage and LAN Usage Parameters fields exist only for
Agent version
≥ 2.0.
 To remove an entry from the Bundle Connection Table:
1. Select a row in the Bundle Connection Table and click <Remove>.
2. Click <Remove>
A warning message appears.
Note