System information

IPmux-8/16 User’s Manual Chapter 3 Configuration Management
Additional Tasks 3-35
Resetting IPmux-8/16 to the Default Configuration
 To set the selected IPmux to the Default Configuration:
1. Configuration > System Commands > Default Configuration.
The following message appears:
RESETTING AGENT CONFIGURATION. Current configuration will be lost.
2. Click <OK> to confirm reset of the default configuration.
The default configuration replaces the current configuration.
Polling the Agent
 To poll the agent:
• Configuration > System Commands > Poll Agent.
The agent is polled.
Clearing the MAC Tables
 To clear the bridge 1 (or 2) dynamic (MAC) LAN table:
1. Configuration > System Commands > Clear MAC Table > Bridge 1 (or 2).
The following message appears:
Erasing Slot1 MAC Table / Information will be lost.
2. Click <OK> to confirm.
The MAC Table is cleared.
Resetting IPmux-8/16
 To reset the selected IPmux-8/16:
1. Configuration > System Commands > Reset.
The following message appears:
RESETTING AGENT. Operation may change system configuration.
2. Click <OK> to confirm.
The IPmux is reset.
The reset operation implements any changes made to the IPmux configuration.
Note