System information

Chapter 4 Configuring Typical Applications IPmux-8/16 User’s Manual
4-4 Configuring IPmux-16
4.2 Configuring IPmux-11 Units
This section explains how to configure IPmux-11 units. The configuration
procedure is similar for both units.
Configuring the IP Parameters
 To configure the host IP parameters:
1. Display the Host IP menu (Configuration > System > Host IP), and configure
the IP address and mask of the host.
 10.10.10.126 for IPmux-11 (A) host
 40.40.40.111 for IPmux-11 (B) host.
2. Save the changes.
Configuring the Manager List
 To configure the manager list:
1. Display the Manager List menu (Configuration > System > Management >
Manager list), and enter IP parameters for the network manager station.
2. Save the changes.
4.3 Configuring IPmux-16
Configuring the IP Parameters
 To configure the host IP parameters:
1. Display the Host IP menu (Configuration > General Configuration >
Management Configuration > Host Configuration), and assign the following
IP addresses to the hosts:
 40.40.40.102 for out-of-band management host
 13.13.13.13 for Ethernet 1 host
 14.14.14.14 for Ethernet 2 host.
2. Save the changes.
Configuring the Manager List
 To configure the manager list:
1. Display the Manager List menu (Configuration > General Configuration >
Management Configuration > Manager List), and enter IP parameters for the
network manager station.
2. Save the changes.