System information

IPmux-8/16 User’s Manual Chapter 4 Configuring Typical Applications
Creating Circuits 4-7
Defining E1 Parameters
 To configure E1 parameters for the source IPmux-16:
1. Double click on the desired IPmux-16 source (40.40.40.102) in the Mesh
Services Map (Figure 4-2).
The Element Manager appears.
Figure 4-3. IPmux-16 Element Manager
2. Select CH1.
3. From the Configuration menu, select Parameters...
The Interface Parameters dialog box appears (Figure 4-4).
4. Select the following parameters:
 Transmit Clock Source = Loopback
 Line Type =Framed (G.704).
5. Click <Set>.