System information

IPmux-8/16 User’s Manual Chapter 4 Configuring Typical Applications
Creating Circuits 4-9
3. From the Configuration menu, select Parameters...
The Interface Parameters dialog box appears (Figure 4-6).
4. Select the following parameters:
 Transmit Clock Source = Adaptive
5. Click <Set>.
Figure 4-6. IPmux-11 E1 Interface Parameters
Creating Circuit
 To create a circuit between IPmux-16 (40.40.40.102) and IPmux-11
(10.10.10.126):
1. On the Services Map, select the source for the circuit. In this example it is the
IPmux-16 (40.40.40.102).
2. While holding down the CTRL key, right click the mouse and drag a line
between the source IPmux-16 (40.40.40.102) and destination IPmux-11
(10.10.10.126).
The Manual Circuit Configuration dialog box appears.