System information

Chapter 4 Configuring Typical Applications IPmux-8/16 User’s Manual
4-14 Creating Circuits
Save Circuit Parameter Settings
 To save parameter settings:
1. In the Manual Circuit Dialog Box, click <Set>.
A message appears asking you if you want to create another circuit.
Figure 4-10. Create Another Circuit Dialog
2. Click <No>.
The circuit is created and appears on the Mesh Services Map.
3. Repeat the preceding steps to configure the second IPmux-11 unit and create
a second circuit between IPmux-16 and the second IPmux-11 unit, using the
appropriate IP address and VLAN parameters.
The second circuit is created and appears on the Mesh Services Map.
Figure 4-11. Mesh Services Map, Showing Circuits Between IPmux-16 and Two IPmux-11 Units