System information

Enabling or Disabling Telnet Access 5-1
Chapter 5
Security Management
This chapter discusses how to manage IPmux-8/16 security, and includes the
following section:
• Enabling or Disabling Telnet Access
5.1 Enabling or Disabling Telnet Access
The Access command allows you to enable Telnet access.
 To enable Telnet access:
1. Options > Access…
The Access dialog box appears (Figure 5-1).
2. Configure Telnet Access and click <Set>.
Figure 5-1. Access Dialog Box
Table 5-1. Telnet Access Parameters
Parameter Possible Values/Remarks
Telnet Access Enable/Disable accessing the device via Telnet
Disable - no one will be allowed to access the device via Telnet
Enable - all users are allowed Telnet Access
Managers Only - Only manager stations listed in the manager's list are allowed