System information

Chapter 7 Fault Management IPmux-8/16 User’s Manual
7-2 Monitoring Object Status
7.1 Monitoring Object Status
Masking Traps
The Masking Traps command enables you to select which traps should be
masked.
 To manually select traps for masking:
1. Options > Masking Traps…
The Masking Traps dialog box appears (Figure 7-1).
2. Select which traps to mask and click <Set>.
Figure 7-1. Masking Traps Dialog Box
Table 7-1. Masking Traps Parameters
Parameter Possible Values/Remarks
Authentication
Failure
Selecting this checkbox disables the Authentication Failure trap.
Checked (disabled), Unchecked (enabled)
LOS, LOF, AIS, RDI, FEBE
Bundle Connection
Bundle
Connectivity
Checked (disabled), Unchecked (enabled)