System information

IPmux-8/16 User’s Manual Chapter 7 Fault Management
Monitoring Object Status 7-3
Viewing Active Alarms
The Alarms command enables you to view agent alarms from the time that the
selected IPmux was turned on or from the last time the active alarm list was
cleared.
 To view the Active Alarm List:
• Fault > Alarms...
The Active Alarm list appears.
Figure 7-2. Active Alarm List
Table 7-2. Active Alarm Parameters
Parameter Possible Values / Remarks
Slot 1 to 4
Port Port number
1 to 8
Alarm No Alarm Present, Far End LOF, Far End Sending AIS, Near End LOF, Near End Loss
of Signal, Near End Sending TS16 LOMF, Remote Alarm Indication
[Print…] Prints list
[Save to File…] Saves list