User's Manual

True to the Music

Radial Engineering Cabbone Owner’s Manual

BUILT-IN SAFETY FEATURES

Once you are satisﬁed that the Cabbone is working with your amp,

you are now set to play. It is important to note that when the Cabbone

switches between the two speaker cabinets, the Cabbone will momen-

tarily activate both speakers at the same time. This ramped overlap

applies a constant load on the ampliﬁer and ensures its safe operation.

Cabbone is also equipped with a feature called SafeMode™. In the

unlikely event that the power is disconnected from the Cabbone, the

Cabbone will immediately go into SafeMode whereby a default setting

will connect the amp to speaker output-1. This ensures a speaker

will always be connected to the amp. If ever you are playing and

the sound suddenly goes off, stop playing immediately and check to

locate the problem by 1st checking cables as this is the usual culprit.

If all cables seem ok, then check the speakers by connecting the amp

directly. If the amp is working when connected directly to the speaker,

the Cabbone or one of the speaker cables could require servicing.

CABBONE BLOCK DIAGRAM