Owner`s manual

Operation
5
quality mode,
CF
CFCF
CF
appears. At the long playback mode,
BF
BFBF
BF
appears. You can record up to 133 minutes in SP
mode, 177 minutes in MP mode, and 290 minutes in LP
mode.
4. Repeatedly press
A-B/MIC
to select the mic sensitivity.
As you press
A-B/MIC
,
C?9ý>?ý
C?9ý>?ýC?9ý>?ý
C?9ý>?ý
or
C?9ýBEý
C?9ýBEýC?9ýBEý
C?9ýBEý
appears. Select
C?9ý>?
C?9ý>?C?9ý>?
C?9ý>?
to record a source that is further away.
5. Press
REC/STOP
. Recording begins and
H;9
H;9H;9
H;9
flashes.
The recorder records the message in the next available
memory position. The message number appears to the
right of the file number. The display also shows the
elapsed recording time.
6. Press
REC/STOP
to stop the recorder.
±
75+0)"81+%'/#%6+8#6'&"4'%14&+0)
When VOX is on and the recorder detects a voice input, it
automatically starts recording. When the voice input stops,
the recorder automatically stops recording and enters
standby mode.
1. In standby mode, repeatedly press
RPT/VOX
to select
the VOX sensitivity.
L#I'
L#I'L#I'
L#I'
,
L#I(
L#I(L#I(
L#I(
, and
L#I)
L#I)L#I)
L#I)
appear. At V-
S1, louder sound activates the VOX recording. At V-S3,
softer sound activates the VOX recording.
2. Press
REC/STOP
for about two seconds.
H;9
H;9H;9
H;9
and
LEN
LENLEN
LEN
flash, and the recording time appears. If there is no
sound,
F7KI;
F7KI;F7KI;
F7KI;
appears, and
H;9
H;9H;9
H;9
and
LEN
LENLEN
LEN
remain on the
screen without flashing.
3. Press
REC/STOP
to stop the recording.
8+'9+0)"6*'"/'/14;"%#2#%+6;"#0&"
4
'/#+0+0)"4'%14&+0)"6+/'
In standby mode, hold down
FILE
. The memory capacity in
MB and the remaining recording time appear.
2.#;+0)"$#%-"/'55#)'5
1. In standby mode, repeatedly press
FILE
to select the
file and repeatedly press or hold down
or
until the
message number you want to play back appears. Press
âý
to see when the selected file is recorded.
2. Press
â
for about two seconds to start playback.
±
3. Press
VOLUME
I
or
J
to adjust the volume.
±
"016'"
±
"
Recording
If you do not press any button
for 30 seconds, the recorder
automatically returns to clock
mode.
During recording, hold down
ERASE to see the starting time
and date of the recording. Hold
down FILE to see the remaining
recording time.
The minimum recording time is
two seconds.
If the recording time exceeds
the maximum,
<KBB
<KBB<KBB
<KBB appears
and you cannot continue to
record.
If you try to record more than 99
messages in a file,
<KBB
<KBB<KBB
<KBB
appears. To continue recording,
erase unneeded messages.
Playing Back Messages
If there are no recorded
messages,
deý?d<
deý?d<deý?d<
deý?d< briefly
appears.
During playback, hold down
ERASE to see when the
message was recorded.