User’s Guide 43-325, 43-326 Caller ID Cordless Phone 43-326 only 43-325 and 43-326 Thank you for purchasing your new cordless phone from RadioShack. Please read this user’s guide before installing, setting up, and using your new phone.
Contents Package Contents ..........................................................................................4 Features............................................................................................................4 Telephone Setup..............................................................................5 Dial a Directory Entry....................................................................................22 Edit a Directory Entry...............................................
Contents Telephone Setup Package Contents Telephone Base and Charger Installation Install the telephone base and chargers as shown below. Make sure that the electrical outlet is not controlled by a wall switch. Handset 43-325 qty. 1 43-326 qty. 2 n Notes: Wall bracket User’s Guide Charger AC adapter 43-325 qty. 1 43-326 qty.
Battery Installation and Charging Install the battery as shown below. For best performance, charge the handset for at least 16 hours before use. When not in use, place the handset in the telephone base or charger. See page 32 for battery operating times. 2. Plug the battery securely into the plug inside the handset battery compartment, matching the color-coded label. 3. Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment. 4.
Wall Mount Installation 1. Position the telephone base as shown below. Insert the extended tabs (marked B) of the wall bracket into the slots on the back of the telephone base (marked B). Push the telephone base down until it clicks into place. Telephone Base Layout 3. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the power adapter into a power outlet not controlled by a wall switch. 4.
(Directory) • Press to enter the directory when the telephone is not in use. • While in a menu, press to scroll up. • During a call, press to raise the listening volume. CHARGE light On when the handset is charging in the telephone base or charger. (Speakerphone) Press to switch between speakerphone and handset. / FLASH • Press to make or answer a call. • During a call, press to receive an incoming call when you receive a call waiting alert.
LCD Language You can set the ringer volume or turn the ringer off. 1. Press MENU/SELECT to show the menu. 2. Press or to select >RINGER VOLUME, then press MENU/SELECT. 3. Press or to adjust the volume. A sample of each ringer volume plays as you scroll through the choices. 4. Press MENU/SELECT to confirm your selection. >RINGER VOLUME RINGER TONE You can select ENGLISH, FRANÇAIS or ESPAÑOL to be used in all screen displays. 1. Press MENU/SELECT to show the menu.
Home Area Code If you dial your local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored without the area code in the call log. Telephone Setup 1. Press MENU/SELECT to show the menu. 2. Press or to select >HOME AREA CODE, then press MENU/SELECT. 3. Use the dialing keys to enter the desired home area code. • Press MUTE/REMOVE to delete a digit.
few seconds. MUTE appears at the bottom of the screen until the mute function is turned off. 2. Press MUTE/REMOVE again to resume the conversation. The handset screen temporarily shows MICROPHONE ON. PHONE 0:00:00 MUTED MUTE 1. Press MENU/SELECT and then press or to highlight >CALL LOG. 2. Press MENU/SELECT to select. 3. Scroll to the desired entry by pressing or . 4. Press MENU/SELECT to dial the displayed number.
2. To answer the intercom call, press /FLASH, , INT, or any dialing keys (0-9, #, *) on the other handset. Both handsets now show INTERCOM. 3. To end an intercom call, press INT, OFF/CLEAR, or place the handset back in the telephone base or charger. n Note: If the other handset does not answer the intercom call within 100 seconds, is in use, or is out of range, your originating handset screen shows UNABLE TO CALL TRY AGAIN and returns to idle mode.
Directory The directory can store up to 50 entries with up to 30 digits for each phone number and 15 characters for each name. • When there are no records in the directory, the screen shows DIRECTORY EMPTY. • When the directory is full and you try to save an entry, the screen shows LIST FULL. • If you try to save a number already stored in the directory, the screen shows ALREADY SAVED. • If the telephone number in the directory exceeds 15 digits, <* appears in front of the telephone number.
Search the Directory Edit a Directory Entry Entries are sorted alphabetically. To search the directory: 1. Press when the handset is not in use. Use the following steps to edit an entry in the directory. >REVIEW STORE RadioShack 800-843-7422 Alphabetical Search To start an alphabetical search: when the handset is not in use. -ORPress MENU/SELECT when the handset is not in use. Press or to select >DIRECTORY and then press MENU/SELECT twice. 2.
Call Log About Caller ID You can use this telephone with regular caller ID service or combined caller ID with call waiting. You can use the telephone’s other features without subscribing to caller ID services. There might be fees for caller ID services and these services might not be available in all areas. Depending on your service, you might see the caller’s number or the caller’s name and number. The time and date are sent by the telephone company along with the call information.
3. Press or to select >REVIEW, then press MENU/SELECT. 4. Press or to browse through the call log. • The name (if available), telephone number, date and time of all incoming calls are shown on the screen. • You hear a double beep when the list reaches the beginning or end of the call log.
Call Log Display Screen Messages Displays When PRIVATE NAME The caller is blocking the name. PRIVATE NUMBER The caller is blocking the telephone number. PRIVATE CALLER The caller is blocking the name and number. UNKNOWN NAME This caller’s name is unavailable. UNKNOWN NUMBER This caller’s number is unavailable. UNKNOWN CALLER No information is available about this caller. It is a long distance call.
MUTE is turned off and the person on the other end can hear you. MUTED You have turned off the handset microphone. The other party cannot hear you but you can hear the other party. Handset and Telephone Base Indicators Handset Lights On when the handset speakerphone is in use. CHARGE On when the handset is charging in the telephone base or charger. NEW VOICEMAIL There are new voicemail messages from your telephone company. NO LINE There is no telephone line connected.
Battery Expanding Your Telephone System It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance: The handsets provided with your telephone system are pre-registered. Each handset is assigned a number that shows on the handset display. Additional handsets registered to the telephone system are assigned in sequential order.
Replace a Handset If you want to replace a handset or re-assign the designated handset number of a registered handset, you must de-register all the handsets and then individually register each handset. To make de-registration easier, read all of the instructions on this page before you begin. To de-register all handsets: 1. Press and hold FIND HANDSET on the telephone base for about 10 seconds (until the IN USE light on the telephone base turns on and starts to flash), then release FIND HANDSET. 2.
• If the handset is in the telephone base or charger but the CHARGE light on the handset is not on, refer to “The CHARGE light is off” in this section. • If the battery is completely depleted, it can take up to 10 minutes to charge the handset before PLACE IN CHARGER or LOW BATTERY appears on the screen (page 7). • Purchase a new battery from your local RadioShack store or www. RadioShack.com. The CHARGE light is off.
My caller ID features are not working properly. • Caller ID is a subscription service. You must subscribe to this service from your local telephone company for this feature to work on your telephone. • The caller might not be calling from an area which supports caller ID. • Both you and the caller’s telephone companies must use equipment compatible with the caller ID service. • The caller ID information shows after the first or second ring.
for 15 seconds, then plug in the power adapter and re-install the battery. Place the handset in the telephone base and allow up to one minute for the handset and telephone base to synchronize. • Other electronic products might prevent your handset and telephone base from communicating with each other.
• If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation. • If the product has been dropped and the telephone base and/or handset has been damaged. • If the product exhibits a distinct change in performance. 13.
• • • • telephone base and the cordless handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones. Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet.
46 Limited Warranty RadioShack warrants this product against defects in materials and workmanship under normal use by the original purchaser for one (1) year after the date of purchase from a RadioShack-owned store or an authorized RadioShack franchisee or dealer. RADIOSHACK MAKES NO OTHER EXPRESS WARRANTIES.
Protect the environment by recyclying your used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. ©2009. RadioShack Corporation. All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.