Instructions / Assembly

12
No part of this publication may be produced, transmitted, transcribed, stored in a retrieval system, or translated into any language
in any form by any means without the written permission
Safety Screw
Mounting
Plate Screw
Switch Housing
Screw
Blade to
Arm Screw
Ceiling
Canopy
Support Rod
Fan Body
Fan Blade
Set Screw
Forward/Reverse
Switch
Blade Arm
Switch
Housing
Your new ceiling fan is now ready for use.
Reset your circuit breaker and restore power to the cir-
cuit. See the Operation Instructions below to review the
function of each control on your fan.
The pull chain located on the switch housing (see gure
13) controls the speed of your fan. When the fan is OFF,
pull the chain once for HIGH speed, twice for MEDI-
UM speed, three times for LOW speed and fourth time
to turn it off again.
The slide switch located on the switch housing (see g-
ure 14) controls the direction of blade rotation. The
LEFT position sets the blades in REVERSE rotation (air
moves UP). The RIGHT position sets the blades in
FORWARD rotation (air moves DOWN).
Operation Instructions
Maintenance
Your fan requires very little maintenance. Cleaning of
the housing should be done with a damp soft cloth (NO
CLEANING AGENTS). On the blades, use a duster or
dry cloth because any moisture could cause the blades
to warp.
Motor
Housing
cover
Coupler
Cover
Switch
Housing
Mounting
Plate
Canopy
Screw
Motor
Rubber
Canopy
Cover
Housing
Cover
Screw