Specifications

EPC-8A Hardware Reference

To install Windows 3.1 drivers from within Windows, proceed as follows:

1. Ensure that Windows 3.1 is already installed on your computer and start Windows

2. From the Main window of the Program Manager run the Windows 3.1 Setup program.

3. Highlight the desired choice by moving the cursor to the correct display driver, and

then press [Enter].

4. Select Change System Settings... from the Options menu of Setup.

5. Click on the down arrow at the right side of the Display: line. Scroll to the end of the

list of available display drivers and select from the following resolutions:

* CHIPS 655DGX-VL/ISA 1024x768x16

* CHIPS 655DGX-VL/ISA 640x480x16

* CHIPS 655DGX-VL/ISA 640x480x256

* CHIPS 655DGX-VL/ISA 800x600x16

* CHIPS 655DGX-VL/ISA 800x600x256

6. Highlight by moving the cursor to the desired display driver, and then click OK.

7. Continue with the remiander of the setup procedure. The changes do not take effect

until Windows restarts.

Microsoft Windows 95

Driver Installation Procedure

1. Click Start, then Settings, then Control Panel.

2. Start the "Display" applet program.

3. Click the Settings tab, then click the Change Display Type button

4. Click the Change button in the Adapter area.

5. Click the Have Disk button, then click the OK button.

6. Specify the path to the new driver and press the <ENTER> key.

7. Insert the drivers disk labeled “VGA Disk 1 of 2” in the A: floppy drive, and enter A:\.

The “Select Device” dialog box appears.

8. Select the adapter that corresponds to the one you installed in your machine and click

the OK button

Windows 95 copies the display drivers to the proper directories on your system.

Continue choosing Close until asked to restart your machine from the Systems

Settings Change dialog box.

After the system restarts, you can go back to the Display applet and select alternate

screen resolutions and color depths.

OSR2 Driver Installation Procedure

1. Open the Control Panel by selecting the Start menu, then Settings, then Control Panel.

2. Double-click the Display icon.