Specifications

Chapter 3: BIOS Configuration
21
Flash ROMdisk Enables Flash memory on the EPC-8A. This must be selected
for the Flash memory to appear as a drive. The base address
you select defines where the Flash ROMdisk BIOS extension is
installed.
Options include:
DC000–DFFF0h
D8000–DBFF0h
D4000–D7FF0h
D0000–D3FF0h
CC000–CFFF0h
C8000–CBFFFh
Not Installed
Important: You cannot have an IDE drive if the resident Flash
memory is the boot device. For more information, see About
Drive Letter Assignment on page 18.
Serial RFA Recovery Selects the base address of the Flash ROMdisk (also known as
RFA or Resident Flash Array) serial update BIOS extension. Use
this option to update a corrupt Flash ROMdisk from the COM1 port.
Options include:
DC000–DFFF0h
D8000–DBFF0h
D4000–D7FF0h
D0000–D3FF0h
CC000–CFFF0h
C8000–CBFFFh
Not Installed
Important: Do not place at the same base address as other
BIOS extensions.
VME ROMdisk Enables VME memory on the EPC-8A. This must be selected for
the VME memory to appear as a drive. The base address you
select defines where the VME ROMdisk BIOS extension is
installed.
DC000–DFFF0h
D8000–DBFF0h
D4000–D7FF0h
D0000–D3FF0h
CC000–CFFF0h
C8000–CBFFFh
Not Installed
Make sure you do not choose an address used for Flash
devices. The address chosen affects whether or not this is the
boot device.
Field Description