Specifications

EPC-8A Hardware Reference

Integrated Peripherals Sub-Menu

Use the options in this sub-menu to configure the COM and LPT ports.

VME Scan Range Used for VME booting. To boot from VME:

1. Use XFORMAT with the /F option to first create a file that looks

like a FAT/boot record.

2. Upload the file to VME memory on a 100000h boundary in one of

the memory ranges below.

3. Set the scan range to match where in VME memory the file was

placed.

4. Be sure to enable the VME ROMdisk BIOS extension to enable

scanning.

00000000–FFF00000 A32

00000000–00F00000 A24

FF000000–FFF00000 A24

Field Description

COM port Enables or disables the COM1 and COM2 ports. The defaults

include:

COM1 3F8 and IRQ4

COM2 2F8 and IRQ3

LPT port Enables or disables the LPT port. The default is 378 and IRQ 7.

Field Description

Figure 3-8. Integrated Peripherals sub-menu

Integrated Peripherals Item Specific Help

COM1: [3F8, IRQ 4]

COM2: [2F8, IRQ 3]

LPT port: [378, IRQ 7]

LPT Mode: [Output Only]

F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults

ESC Exit ←→ Select Menu Enter Select Sub-Menu F10 Previous Values

Advanced