Specifications

Chapter 3: BIOS Configuration
23
EXM Menu
Use this menu to set up the optional EXM expansion modules in your EPC-8A. Enter the
EXM-ID, plus option byte information for OB1 and OB2. This information is found in the
hardware reference manual shipped with each EXM expansion module.
Note the following when installing EXMs:
SLOT Indicates the EXM slot in which the EXM is installed.
ID A hard-wired ID value. Each type of EXM has a unique ID value.
LPT Mode Options include:
• ECP: Enables the parallel port’s Extended Capabilities
Port (ECP).
• Bi-directional: Enables the parallel port as bi-directional.
• Output only: Enables the parallel port as output only.
When you are finished, press ESC to exit back to the Advanced
Menu.
Field Description
Figure 3-9. EXM menu
PhoenixBIOS Setup - Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced VME Exit
EXM Slot 31
ID: [FD]
Option Byte 1: [01]
Option Byte 2: [00]
EXM Slot 0
ID: [FF]
Option Byte 1: [7D]
Option Byte 2: [07]
EXM Slot 1
ID: [00]
Option Byte 1: [00]
Item Specific Help
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit ←→ Select Menu Enter Select Sub-Menu F10 Previous Values
EXM