Specifications

EPC-8A Hardware Reference
68
EXP-BP3A Subplane
Figure E-4. EXP-BP3A Subplane
The EXP-BP3A subplane allows for a
processor and a total of four EXM
modules.
The EXP-BP3A has five connectors on
each side.
After jumpering the backplane, plug the
subplane into the VMEbus backplane such
that the P2 connector on the back of the
4-row DIN is pressed into the J2 connector
of the left-most VMEbus slot that the
EPC-8A subsystem will occupy.
The EXM slot numbers are shown in the
drawing.
Insert EPC-8A
in these two
slots