Specifications

EPC-8A Hardware Reference
70
EXP-BP4A Subplane
Figure E-6. EXP-BP4A Subplane
The EXP-BP4A subplane is used in systems
needing a CPU and six EXM modules.
The EXP-BP4A has seven connectors on each
side.
After jumpering the backplane, plug the subplane
into the VMEbus backplane such that the P2
connector on the back of the 4-row DIN is
pressed into the J2 connector of the left-most
VMEbus slot that the EPC-8A subsystem will
occupy.
The EXM slot numbers are shown in the
drawing.
Insert EPC-8A
in these two
slots