Specifications

Appendix E: Subplanes
71
EXP-BP6 Subplane
Figure E-7. EXP-BP6 Subplane
The EXP-BP6 subplane is used in a
configuration with an EPC-8A processor
module, six EXM modules, and an EXP-MX
Mass Storage module.
The EXP-BP6 has eight connectors on the
front side and seven on the rear.
Plug the subplane into the VMEbus backplane
such that the P2 connector on the back of the
4-row DIN is pressed into the J2 connector of
the left-most VMEbus slot that the EPC-8A
subsystem will occupy.
The EXM slot numbers are shown in the
drawing.
Insert EPC-8A
in these two
slots