DVE-DM365 Digital Video Encoder Configuration and User Guide Revision 1.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Copyright Notice This document is copyright of RadiumBoards, All Rights Reserved. No part of this document, in whole or in part, may be used, reproduced, stored in a retrieval system or transmitted, in any form, or by any means, electronic or otherwise, including photocopying, reprinting, or recording, for any purpose, without the express written permission of RadiumBoards.
DVE-DM365 Digital Video Encoder Configuration and User Guide 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. V1.2 ..................................................................................... 6 ..................................................................................................................... 6 .................................................................................................... 6 ......................................................................................
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 ........................................................................................................................ 56 13. .................................................................................................. 57 ..................................................................................................................... 57 .............................................................................................
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 ......................................................... 45 ................................................................ 45 .............................................................. 46 ................................................................. 48 ..................................................................... 49 .......................................................................... 52 .............................
DVE-DM365 Digital Video Encoder Configuration and User Guide 1. V1.2 ABOUT THIS DOCUMENT Purpose This document provides details of the DVE-DM365 including its features and functionality and how to install and configure the DVE-DM365. Intended Audience This document is intended for these target groups: Installation Engineers Network Administrators : It is pre-requisite to have knowledge of Wi-Fi and networking.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Terms and Abbreviations The different terms and abbreviations used in this document are explained in Table 2 below.
DVE-DM365 Digital Video Encoder Configuration and User Guide 2. V1.2 OVERVIEW OF THE DVE-DM365 RadiumBoards DVE-DM365 enables you to quickly and cost effectively convert standard analog cameras into highly versatile IP Network cameras, which are ideal for securing locations such as small businesses, offices, shops, hotels or residences. The DVE-DM365 accepts NTSC or PAL video input from an analog camera, converts to digital and then encodes the video into high quality H.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The completely optioned DVE-DM365 assembly, shown in Figure 1 below, contains four boards which are stacked together. Figure 1 DVE-DM365 Assembly Hardware Overview Each of the four (4) different cards available for the DVE-DM365 is shown below and may be used for reference. Note the images are for representation only and may be slightly different depending upon build and revision.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Figure 5 Power Over Ethernet (POE) Card Table 4 below describes the various interfaces to the DVE-DM365.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 : There is a secure digital (SD) card slot available on the right hand side of the DVE-DM365. This is used for inserting the SD card and archiving / accessing images or videos from the SD card whenever required. Features Radium’s DVE PCB suite is a modular design based on the industry leading TI DaVinci DM365 platform SoC. This 4-PCB modular design allows multiple product configurations as described in the table below.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.
DVE-DM365 Digital Video Encoder Configuration and User Guide 3. V1.2 INSTALLING THE DVE-DM365 Connecting the DVE-DM365 After completing assembly of the DVE-DM365 you may perform the following steps to connect power and network to the camera. DC Adapter: Connect the power adaptor plug into the power supply jack and then plug the adapter into a power source. Connect an Ethernet cable from the Ethernet port into the PC.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Perform the following steps to configure the IP address: Go to desktop, right-click , and select Right-click and select . . The Local Area Connection Properties dialog box appears.
DVE-DM365 Digital Video Encoder Configuration and User Guide Select the checkbox and click The Internet Protocol (TCP/IP) Properties dialog box appears. V1.2 . Click . Set the IP address to 192.168.1.x and subnet mask to 255.255.255.0, where x is a number between 2 and 254, except 168. Click to close all windows. This connects the camera to the network. You can now configure and change the default settings of the camera as explained in the subsequent chapters.
DVE-DM365 Digital Video Encoder Configuration and User Guide 4. V1.2 ACCESSING THE GUI This chapter explains how to access the DVE-DM365 through a web browser. The DVE-DM365 is functional with the default settings, but you can configure and change these settings through the GUI Log In You can connect to the camera by performing the following steps: Enter the http://192.168.1.168URL in the web browser as shown below to access the GUI.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 When the dialog box opens, click on the Security tab. b) Then click on custom level. Then a security setting – internet zone dialog box will open, c) Then enable all the Active X controls and plug-in. d) After enabling all the Active X controls click on ok .then a dialog box open, click on yes.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Then again enter the http://192.168.1.168URL in the web browser to access the GUI. Then a login page opens. Enter user name as admin and password as admin. Click on login. The default page (known as the Live View page) appears displaying the live video. The following options appear in the Live View page: 1) Zoom in: The zoom in button enables you to zoom in the live video as you can enlarge the view of an object to show more details.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Accessing the Configuration You can configure and change the default settings of the camera by accessing the configuration in the Live View page. The menu further lists the basic and advanced configuration options. Follow the below steps to access the configuration menu page: Click configuration in the Live View page. The Basic Configuration page appears displaying the navigation panel on the left side.
DVE-DM365 Digital Video Encoder Configuration and User Guide 5. V1.2 CONFIGURE SYSTEM SETTINGS The system configuration displays all the system information and you can configure SYSTEM settings by performing the following steps: Log in to the network camera to open its Live View page. Click the Configuration menu. In the left pane, expand the System Settings menu. Uptime: Indicates the uptime duration from which the DVE is connected. Serial No.: Specifies the serial number of the DVE.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Configure Date and Time Settings Customize the date and time format to suit your needs while configuring system settings. It allows the GUI and email alerts to set time and date according to the user-defined date and time. a) Set manually: Manually set the date and time by clicking on the field and set the date and time then click on apply. b) SNTP: Specifies the SNTP server URL address configured in the SNTP Server Setting page.
DVE-DM365 Digital Video Encoder Configuration and User Guide 6. V1.2 CONFIGURE NETWORK SETTINGS The network settings allow you to assign an IP address to the camera. This can be done either manually or automatically from a dynamic host configuration protocol (DHCP) server. If you are not using DHCP, provide the IP address, subnet mask, and default gateway of the camera. If you enable DHCP, a DHCP request is sent when the camera is turned on. By default static addressing is enabled.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The following table describes the various fields that appear in the Network page: Table 7 Fields in the Network Settings Menu Field Name Enable DHCP IP Address Subnet mask Default Gateway Primary and secondary DNS HTTP Port HTTPS Port Description Indicates that you can enable or disable the DHCP. DHCP supports static addressing through a permanent IP address.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 NOTE: To enter HTTPS port number ranges from 1024 to 6553, you must save the configuration and reboot the DVE. Provide the desired values. Click APPLY to save the changes. Configure FTP Settings An FTP server can receive snapshot or video file uploaded from the camera. You can add an FTP server to store images or videos.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The following table describes the various fields that appear in the FTP Server Setup page: Table 8 Fields in the FTP Server Setup Page Field Name FTP Name Server Network Address Upload Path Description Specifies the name of the FTP server. Specifies the host name or IP address of the FTP server. Specifies the upload path of the FTP server. Avoid special characters, for example “,<,>,%. Specifies the port number of the FTP server.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The following table describes the various fields that appear in the DDNS Setting page: Table 9 Fields in the DDNS Application Setting Page Field Name Description DDNS Enable or disable the DDNS by check the box Specifies the DDNS service provider Specifies URL provided by the DDNS service provider. Specifies the username Specifies the password correspond to the username.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The following table describes the various fields that appear in the SMTP server and mail Settings page: Table 10 Fields in the SMTP Application Settings Page Field Name Description Login method Specifies the login method for sending mails, whether form user account or from anonymous. Specifies the SMTP server from where the mail is to be sent. Specifies the port number of the SMTP server. Specifies the username.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Provide the desired values. Click to save all changes. Configure SMS Settings You can enable sending of SMS and notifications from the camera to predefined mobile number through SMS.You can configure SMS settings by performing the following steps: Log on to the network camera to open its Live View page. Click the Configuration menu. In the left pane, expand the Network Settings menu and click SMS .
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The following table describes the various fields that appear in the SMS server and Setting page: Table 11 Fields in the SMS Settings Menu Field Name Username Password Service Api Description Specifies the username Specifies the password correspond to the username Specifies the following http://sms.foosms.com/pushsms.php?username= |USERNAME|&password=|PWD|&sender= |DVE|&to=|TO|&message=|MESSAGE| Mobile No.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The following table describes the various fields that appear in the 3G Setting page: Table 12 Fields in the SMS Settings Menu Field Name Description Status Specifies the status of the 3G weather it is connected, not connected or reconnecting. Specifies the type of connectivity (Manual or Auto), select the type from the drop down list. Specifies the APN for the different devices. - Specifies the Dial number for the different devices.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The following table describes the various fields that appear in the NAS Setting page: Table 13 NAS Settings Page Field Name Description NAS enable Enable or disable the NAS by check or uncheck the box Specifies the network storage location as server name or server IP followed by directory to be mounted. For e.g. :/mount directory Network Storage Location 7. Provide the desired values. Click to save all changes.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The following table describes the various fields that appear in the Audio Setting page. Table 14 Fields in the Audio Setting Page Field Name Audio Enable Input volume Encoding Sample rate Bit rate Output volume Description Specifies whether the camera audio is enable or not. Values ON/OFF Specifies the input sound volume range Specifies the encoding format of AAC-LC / G711 the audio.
DVE-DM365 Digital Video Encoder Configuration and User Guide 8. V1.2 CONFIGURE VIDEO SETTINGS You can configure the video settings such as video encoding and video parameters by performing the following steps: Log on to the network camera to open its Live View page. Click the Configuration menu. In the left pane, click on the video Settings. You can configure the video encoding and video parameters and OSD by click on the video encoding and video parameters button in the video setting menu bar.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Video Encoding The following table describes the various fields that appear in the video encoding page: Table 15 Fields in the Video Encoding Page Field Name Video mode Description Specifies the type of video mode Video Specifies the video system system format Video profile Specifies the different profile for different video stream Streams Specifies thee different stream which can be enable / disable.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Video Parameters The following table describes the various fields that appear in the video parameters page: Table 16 Fields in the video parameters Page Field Name Iris level Mirroring Description Values Use the iris bar for increase or decrease the iris level. Specifies the type of Horizontal, vertical, both. mirroring. Provide the desired values. Click APPLY to save all changes.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 OSD The on-screen display (OSD) option allows you to create a custom text message and place it nearly anywhere on the video screen. The following table describes the various fields that appear in the OSD Settings page: Table 18 Fields in the OSD Settings Page Field Name Enable Date and Time Stamp Camera name Bit rate FPS Description Indicates whether to insert the date and time stamp in the image or video.
DVE-DM365 Digital Video Encoder Configuration and User Guide 9. V1.2 EVENT CONFIGURATION This section describes how to configure the camera to perform certain actions when events occur. Actions such as audio detection, Ethernet loss, video loss, motion detection, etc. can trigger an event such as alarm out, audio out, etc. You can configure actions to trigger the event.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Audio Detection The following table describes the various fields that appear in the Audio Detection Setup page: Table 19 Fields in the Action Types Setup Page Field Name Audio detection Enable FTP upload Audio Out Enabled Alarm Out Enabled Description You can enable / disable the audio detection by check the box. You can just click the box and can change any value between 10 to 200. The alarm level can be set by using the level bar.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Network Loss The following table describes the various fields that appear in the Network loss Setup page: Table 20 Fields in the Action Types Setup Page Field Name Network loss Interval (sec) Alarm level Save to SD Card Audio Out Enabled Alarm Out Enabled Description You can enable / disable the network loss by check the box. You can just click the box and can change any value between 10 to 200.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Video Loss The following table describes the various fields that appear in the video loss Setup page: Table 21 Fields in the Action Types Setup Page Field Name Video loss Interval (sec) Enable FTP upload Audio Out Enabled Alarm Out Enabled Save to SD Card Enable Email (SMTP) Enable SMS Description You can enable / disable the video loss by check the box. You can just click the box and can change any value between 10 to 200.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 External Trigger The external trigger is enabled by using ALARM IN and GND pins.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Motion Detection The following table describes the various fields that appear in the video loss Setup page: Table 23 Fields in the Action Types Setup Page Field Name Motion detection Interval (sec) Sensitivity Enable FTP upload Audio Out Enabled Alarm Out Enabled Save to SD Card Enable Email (SMTP) Enable SMS Description You can enable / disable the motion detection by check the box.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Recording Scheduler This page allows you to configure to continuous save video to SD card or FTP storage or NAS. To create or modify the scheduler click on the add/edit button.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Provide the desired values. Click APPLY to save all changes. Heartbeat Images Keep alive mechanism to ensure camera operation and up time. The following table describes the various fields that appear in heartbeat image page: Table 26 Fields in the Heartbeat Image Page Field Name Snapshot Snapshot duration Snapshot interval No.
DVE-DM365 Digital Video Encoder Configuration and User Guide 10. V1.2 ALARM ACTION You can configure alarm action such as media storage and notification by performing the following steps: Log on to the network camera to open its Live View page. Click the Configuration menu. In the left pane, click on the Alarm Action. You can configure the media storage and notification by clicking on button in the alarm action menu bar.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Media Storage The following table describes the various fields that appear in media storage page: Table 27 Fields in the Media Storage Page Field Name Pre/Post – Recording (sec) SD File list SD File overwrite SD card full alarm ACTION Enable Email (SMTP) Enable SMS Status Description The pre/post recording can be enable or disable by check/clear the box. Pre/Post alarm video recording durationis selected from the drop-down list.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Notification The following table describes the various fields that appear in media notification page Table 28 Fields in the Notification Page Field Name Audio file Test Repeat Alarm out (sec) Description Specifies the audio file which will play at the time of audio out. Play the selected audio file Audio1 to audio5 It can be used to add Repetition cycle for the audio file (0) means continues.
DVE-DM365 Digital Video Encoder Configuration and User Guide 11. V1.2 PRIVACY MASKING Privacy masks are configurable areas of solid color that allow concealment of parts of the image that should not be viewable. You can configure Privacy masking by performing the following steps: Log on to the network camera to open its Live View page. Click the Configuration menu. In the left pane, click on the Privacy Masking.
DVE-DM365 Digital Video Encoder Configuration and User Guide 12. V1.2 PTZ The Pan / Tilt / Zoom (PTZ) menu allows users to pan(move left and right), tilt (move up and down), and zoom in and out a specific area with just a push of a button and preset positions. You can configure Pan/Tilt/Zoom settings by performing the following steps: Log on to the network camera to open its Live View page. Click the Configuration menu. In the left pane, click on PTZ.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Protocol The following table describes the various fields that appear in PTZ protocol page. Table 29 Fields in the Protocol Page Field Description Name PTZ enable User can enable / disable the PTZ control. Protocol Specifies the corresponding dome protocol Address Specifies the corresponding dome address Baud rate Specifies the corresponding dome baud rate length.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Preset Set a location for the preset, calls the preset points, PTZ automatically turns to the setting position. Use these buttons to move the camera. Use these buttons to change the zoom, focus and iris level and set the home position.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The following table describes the various fields that appear in PTZ preset page Table 30 Fields in the Preset Page Field Name Preset ID Name Go Save Delete © 2013 RadiumBoards All Rights Reserved Description Specifies a pre-defined camera view that can be quickly and easily viewed in the Live View page, simply by selecting the preset's name from the dropdown list. You can set the different location for the preset position.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Tour Tour means that the selective channel is single window alternate patrol preview. The following table describes the various fields that appear in PTZ tour page Table 31 Fields in the Tour Page Field Name Tour Name Preset (15) Go Save Delete Stop © 2013 RadiumBoards All Rights Reserved Description Specifies the different tour that you can select, edit and configure the tour. Specifies the name correspond to the selected tour.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 User You can configure USER settings by performing the following steps: Log in to the network camera to open its Live View page. Click the Configuration menu. In the left pane, click on User. The user account settings include configuring usernames/ passwords and adding/ deleting users.
DVE-DM365 Digital Video Encoder Configuration and User Guide 13. V1.2 MAINTENANCE You can configure maintenance settings by performing the following steps: Log on to the network camera to open its Live View page. Click the Configuration menu. In the left pane, click on Maintenance.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Reboot The following table describes the various fields that appear in reboot page Table 33 Fields in the Reboot Page Field Name Description Select Specifies the configuration that configuration you want to select and reboot with that configuration.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Table 34 Fields in the SD Card Page Field Name Remove Mount Format Description Values Use this button to remove/ unmount the SD card. Use this button to mount the SD card. Use this button to format the SD card. Firmware Firmware update refers to the replacement of a product with a newer version of the same product in order to keep the system updated.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 The following table describes the various fields that appear in the Update Firmware page: Table 35 Fields in the Firmware Page Field Name Current firmware version Browse Update Description Kernel Version Specifies the kernel version of the firmware. UBL version Specifies the UBL version. U-Boot Version Specifies the universal boot loader version which initializes the version of the firmware.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 Logs Logs provide information about system events. The following table describes the various fields that appear in the Log page: Table 36 Fields in the Log Page Field Name All/System/Event Search Download Item Date and Time Events First Page Previous Next Final page © 2013 RadiumBoards All Rights Reserved Description You can select the event type you want to see. You can search for any particular log corresponds to string entered.
DVE-DM365 Digital Video Encoder Configuration and User Guide V1.2 SSL SSL is Secure Sockets Layer. It is a commonly used protocol for managing the security of a message transmission on the internet. The user has to provide the Certificate and Key for the HTTPS Upload. For SMTP Upload, only the Certificate is required.
