User guide

© 2013 RadiumBoards Page 11 of 62
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
Figure 5 Power Over Ethernet (POE) Card
Table 4 below describes the various interfaces to the DVE-DM365.
Table 4: DVE-DM365 Interface Description
Interface
Description
Camera Connector
Audio in, audio out, video in and video out interfaces
PTZ
The Pan / Tilt / Zoom (PTZ) menu allows users to pan
(move left and right), tilt (move up and down) and zoom in
and out within a specific area with just a push of a button
and preset positions.
Auto IRIS
Automatically adjustable iris opening in response to
changes in light levels
Ethernet Connector
PoE
Standard RJ-45 Ethernet connector for IP network
connection.
If PoE card is attached it allows transmission of power
and data via a single Ethernet cable.
Power Input
Power adapter connection. This is a +12V DC inlet, which
connects to an external power supply. To be used if no
PoE is available.
SD Card Holder
For inserting the SD card to store data directly onto the
card.
USB
USB interface can be used to connect the Wi-Fi USB
Stick or USB 3G dongle
Alarm In
Alarm out
Two alarm ports – input and output available on the back
panel of the camera.
Debug Console
Debug console is used for service and debugging
purposes.