User guide

© 2013 RadiumBoards Page 12 of 62
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
 : There is a secure digital (SD) card slot available on the right hand side of
the DVE-DM365. This is used for inserting the SD card and archiving / accessing
images or videos from the SD card whenever required.
Features
Radium’s DVE PCB suite is a modular design based on the industry leading TI
DaVinci DM365 platform SoC. This 4-PCB modular design allows multiple product
configurations as described in the table below.
Table 5 DVE-DM365 Module Configurations
The DVE-DM365 is a feature rich video platform which supports up to D1
resolution, H.264, MPEG and MJPEG compression, motion detection, privacy
masking, heartbeat snapshots and much more. The design supports multiple
alarm configurations and event detection. Through the USB port and appropriate
3G and Wi-Fi dongle(s), it can support 3G and Wi-Fi streaming.
The device also allows you to accelerate your surveillance camera product
designs especially since this design is ready and optimized for production and
comes packaged with production grade software, firmware, BSP and configuration
utilities.
Model
Processor
Network
POE
I/O
Interfaces
DVE-Basic
X
X
Audio-In, Video-In, PTZ, Iris, Ethernet
DVE-L
X
X
X
Audio-In, Video-In, PTZ, Iris, Ethernet
+ Power Over Ethernet (POE)
DVE-XL
X
X
X
Audio-In, Video-In, PTZ, Iris, Ethernet
+ USB, Alarm In/OUT, SD Card, UART
DVE-XXL
X
X
X
X
Audio-In, Video-In, PTZ, Iris, Ethernet
+ Power Over Ethernet (POE)
+ USB, Alarm In/OUT, SD Card, UART