User guide

© 2013 RadiumBoards Page 18 of 62
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
4. ACCESSING THE GUI
This chapter explains how to access the DVE-DM365 through a web browser. The
DVE-DM365 is functional with the default settings, but you can configure and
change these settings through the GUI
Log In
You can connect to the camera by performing the following steps:
Enter the http://192.168.1.168URL in the web browser as shown below to access
the GUI.
If the Active X is not installed then it shows an add-on for this website failed to run.
Perform the following steps to enable the Active X control:
a) Click on tools in the menu bar then click on internet options.