User guide

DVE-DM365

Digital Video Encoder

Configuration and User Guide

V1.2

5. CONFIGURE SYSTEM SETTINGS

The system configuration displays all the system information and you can configure

SYSTEM settings by performing the following steps:

 Log in to the network camera to open its Live View page.

Click the Configuration menu.

In the left pane, expand the System Settings menu.

Uptime: Indicates the uptime duration from which the DVE is connected.

Serial No.: Specifies the serial number of the DVE.

MAC address: Specifies the MAC address of the DVE.

IP address: Specifies the IP address of the network used by the camera to connect

to that network. IP addresses allow all the connected computers / devices to find

each other and to pass data backward and forward. If you have enabled DHCP, the

IP address is assigned dynamically and automatically by DHCP.

Camera name: Change the camera name by simply clicking on the text field and

typing the new name and then click on apply button at the bottom.

Language: Change the preferred language by clicking on the drop down button

and selecting the particular language you want to select and click on apply button.