User guide

© 2013 RadiumBoards Page 24 of 62
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
6. CONFIGURE NETWORK SETTINGS
The network settings allow you to assign an IP address to the camera. This can
be done either manually or automatically from a dynamic host configuration
protocol (DHCP) server. If you are not using DHCP, provide the IP address,
subnet mask, and default gateway of the camera. If you enable DHCP, a DHCP
request is sent when the camera is turned on. By default static addressing is
enabled.
You can configure NETWORK settings by performing the following steps:
 Log on to the network camera to open its Live View page.
 Click the Configuration menu.
 In the left pane, click on the Network Settings menu.