User guide

© 2013 RadiumBoards Page 25 of 62
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
The following table describes the various fields that appear in the Network page:
Table 7 Fields in the Network Settings Menu
Field Name
Description
Values
Enable DHCP
Indicates that you can enable or
disable the DHCP. DHCP supports
static addressing through a
permanent IP address.
-
IP Address
Specifies the IP address of the
network used by the camera to
connect to that network. IP
addresses and allow all the
connected computers/devices to
find each other and to pass data
backward and forward. If you have
enabled DHCP, the IP address is
assigned dynamically and
automatically by DHCP.
Default:
192.168.1.168
Subnet mask
Specifies the subnet mask or
routing prefix of an address written
in a form identical to that of the
address itself.
Default:
255.255.255.0
Default Gateway
Specifies the address of the
default gateway.
Default:
192.168.1.254
Primary and
secondary
DNS
Specifies the primary and
secondary server used for
information about a domain as well
as the location of resources
associated with a domain.
Default:
192.168.1.1 and
192.168.1.3
HTTP Port
Specifies the communications
endpoint for the uniform resource
locator (URL) of a website or other
services.
Default: 80
Range from 1024
– 65536
HTTPS Port
Specifies the communications
endpoint for the uniform resource
locator (URL) of a website or other
services.
Default: 81
Range from 1024
– 65536
UPnP
Multicast