User guide

© 2013 RadiumBoards Page 44 of 62
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
Motion Detection
The following table describes the various fields that appear in the video loss Setup
page:
Table 23 Fields in the Action Types Setup Page
Field Name
Description
Values
Motion
detection
You can enable / disable the
motion detection by check the
box.
You can select all or remove all
windows by selecting the
appropriate radio button on the
panel.
Enable/disable
Interval (sec)
You can just click the box and
can change any value between
10 to 200.
(10 -200)
Sensitivity
The detection sensitivity can be
adjusted by selecting from the
sensitivity bar.
Enable FTP
upload
Indicates whether to enable
FTP upload feature or not.
Audio Out
Enabled
Indicates whether to enable
audio sound or not.
Alarm Out
Enabled
Indicates whether to enable
alarm out or not.
Save to SD
Card
Indicates whether to save to SD
card or not.
Enable Email
(SMTP)
Indicates whether to enable
email notification feature or not.
Enable SMS
Indicates whether to enable
SMS notification or not.
 Provide the desired values.
 Click APPLY to save all changes.