User guide

© 2013 RadiumBoards Page 56 of 62
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
User
You can configure USER settings by performing the following steps:
 Log in to the network camera to open its Live View page.
 Click the Configuration menu.
 In the left pane, click on User.
The user account settings include configuring usernames/ passwords and adding/
deleting users.
There will be 10 user accounts by default, but only one user can access the camera
at the initially that is admin, and then admin can change the settings related to the
users.
 You may add nine different users by clicking on the Add New button shown in
the above fig.
 You may set the privilege by check the box that you want to give access
permission.
 If no check box selected, user will have only “Video view permission”.
 Once you added the user, if required to modify you have to delete it first and
re-add the user.
 You may delete the user account by using the delete button shown in the
above figure.
 Provide the desired values.
 Click APPLY to save all changes.