User's Manual
Table Of Contents
- Copyright Statement
- FCC and IC Statements
- GNU General Public License Statement
- Preface
- 1 Introduction to BreadCrumbs
- 2 Description of a BreadCrumb ME4
- 3 Using BC|Commander
- 4 Deploying a BreadCrumb Mesh Network
- 5 Firmware Upgrade
- 6 Troubleshooting
- Appendix A: Radio Channels and Frequencies
- Appendix B: Error and Warning Codes
- Appendix C: Using Pole Mount Bracket
- Appendix D: Rajant End User License Agreement
- Appendix E: GNU General Public License
Rajant Corporation BreadCrumb® ME4 v11 User Guide
03-100126-011 Version 11.0.0
● Release the switch. The Status LED should change to display the blinking red error code 32.
See Appendix B for a description of the blinking red color sequence. The BreadCrumb will then
reboot using the factory default configuration.
Warning
Do NOT turn off or reboot a BreadCrumb that is being zeroized. An interruption to
power during the zeroization process can result in the BreadCrumb being unable to boot
properly.
Tip
The process of zeroizing keys and restoring factory defaults can also be performed
remotely with the BC|Commander management software or with a properly prepared
USB drive. For more information, refer to the BC|Commander v11 User Guide.
15