User's Manual

Rajant Corporation BreadCrumb® ME4 v11 User Guide
03-100126-011 Version 11.0.0
FCC and IC Statements
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the device is operated in a commercial environment. This device generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interference to radio communications. Operation of this device
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at their own expense.
This Class A digital apparatus complies with Canadian ICES-003 and RSS-210 rules.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 et CNR-210 du Canada.
Required Antenna Separation
The FCC/IC wireless approval for this product is conditional on maintaining at least 20cm separation
between the antennas. At least one of the antennas must be connected to the BreadCumb with 50 ohm
coaxial cable. Low loss LMR400 cable is recommended for this application.
WARNING: To satisfy FCC RF exposure requirements a minimum safe distance of 20 cm must be
maintained between this device and all persons while the device is operating.
CAUTION: To reduce potential radio interference to other users, the antenna type and its gain should
be chosen so that the equivalent isotropically radiated power (EIRP) is not more than that permitted for
successful communication.
CAUTION: Changes or modifications not expressly approved by Rajant Corp. could void the user's
authority to operate the equipment.
3