User's Manual
Table Of Contents
- Copyright Statement
- FCC and IC Statements
- GNU General Public License Statement
- Preface
- 1 Introduction to BreadCrumbs
- 2 Description of a BreadCrumb ME4
- 3 Using BC|Commander
- 4 Deploying a BreadCrumb Mesh Network
- 5 Firmware Upgrade
- 6 Troubleshooting
- Appendix A: Radio Channels and Frequencies
- Appendix B: Error and Warning Codes
- Appendix C: Using Pole Mount Bracket
- Appendix D: Rajant End User License Agreement
- Appendix E: GNU General Public License
Rajant Corporation BreadCrumb® ME4 v11 User Guide
03-100126-011 Version 11.0.0
Appendix B: Error and Warning Codes
All possible BreadCrumb error and warning codes are listed below:
JR/LX/LX3/ME3/UX2400 Firmware Upgrade Codes (1*)
11 Flash image file does not exist.
12 Current flash image version is greater than versions of files found on USB drive.
13 No flash image files found.
14 Unable to mount USB drive.
15 Unlocking of /dev/mtd0 failed.
16 fconfig for SetFailsafeBoot failed.
17 Unlocking of /dev/mtd0 failed.
18 fconfig for SetMainBoot failed.
19 Copying of zImage failed.
111 Copying of ramdisk failed.
112 FIS directory update of ramdisk failed.
113 Copying of etc failed.
114 FIS directory update of /etc failed.
115 Copying failed.
116 flashunbundle failed.
117 Version information in flash file name and breadcrumb-buildinfo.conf do not match.
1171 Platform information in flash file name and breadcrumb-buildinfo.conf do not match.
118 Untar failed.
119 FIS directory update of kernel failed.
121 Failed to unmount /etc.
122 In Failsafe mode, but no USB drive detected.
123 BreadCrumb will be in failsafe mode and unable to communicate with other BreadCrumbs after
next reboot.
124 Failed to suspend bcconfigd.
125 Failed to set boot path to next image.
126 Failed to erase end of next file system image.
127 Failed to copy file system image.
128 Failed to checksum file system image.
32