User's Manual
Table Of Contents
- Copyright Statement
- FCC and IC Statements
- GNU General Public License Statement
- Preface
- 1 Introduction to BreadCrumbs
- 2 Description of a BreadCrumb ME4
- 3 Using BC|Commander
- 4 Deploying a BreadCrumb Mesh Network
- 5 Firmware Upgrade
- 6 Troubleshooting
- Appendix A: Radio Channels and Frequencies
- Appendix B: Error and Warning Codes
- Appendix C: Using Pole Mount Bracket
- Appendix D: Rajant End User License Agreement
- Appendix E: GNU General Public License
Rajant Corporation BreadCrumb® ME4 v11 User Guide
03-100126-011 Version 11.0.0
46 Rekeying error.
47 Rekeying error.
48 Rekeying error.
49 Rekeying error.
431 Rekeying error.
432 Rekeying error.
433 Rekeying error.
434 Rekeying error.
435 Rekeying error.
436 Rekeying error.
441 Status override CPLD feature not available (wrong CPLD version).
Fatal Codes (5*)
51 instamesh fatal error.
52 hostapd fatal error.
53 cvm fatal error.
54 fatal error.
55 Low memory - automatic reboot scheduled.
UX Battery Fault Codes (51*)
See BC|Commander System Alerts for more detailed information.
511 Pack 1: does not exist|charge fault|charge gauge fault|discharge fault.
512 Pack 2: does not exist|charge fault|charge gauge fault|discharge fault.
513 Pack 3: does not exist|charge fault|charge gauge fault|discharge fault.
514 Pack 4: does not exist|charge fault|charge gauge fault|discharge fault.
515 Pack 5: does not exist|charge fault|charge gauge fault|discharge fault.
516 Pack 6: does not exist|charge fault|charge gauge fault|discharge fault.
Battery Gas Gauge Codes (6*)
61 Battery gas gauge i2c device could not be found.
62 Incorrect gas gauge revision 1 EEPROM settings.
63 Incorrect gas gauge revision 2 EEPROM settings.
64 Incorrect gas gauge revision 3 EEPROM settings.
65 Unknown gas gauge revision.
34