User's Manual
Table Of Contents
- Copyright Statement
- FCC and IC Statements
- GNU General Public License Statement
- Preface
- 1 Introduction to BreadCrumbs
- 2 Description of a BreadCrumb ME4
- 3 Using BC|Commander
- 4 Deploying a BreadCrumb Mesh Network
- 5 Firmware Upgrade
- 6 Troubleshooting
- Appendix A: Radio Channels and Frequencies
- Appendix B: Error and Warning Codes
- Appendix C: Using Pole Mount Bracket
- Appendix D: Rajant End User License Agreement
- Appendix E: GNU General Public License
Rajant Corporation BreadCrumb® ME4 v11 User Guide
03-100126-011 Version 11.0.0
Appendix C: Using Pole Mount Bracket
● Use the two (2) supplied U-bolts and four (4) nuts to secure the Pole Mount Bracket to a pole up
to 3” in diameter (See Figure 1 below).
● Use the eight (8) supplied screws to attach the BreadCrumb ME4 to the Pole Mount Bracket (See
Figure 2 below).
Figure 3: ME4 Pole Mounted Bracket Figure 4: ME4 Mounted to Pole
36