Manual

RAM DOUBLE SUCTION CUP BASE ASSEMBLY INSTRUCTIONS
PARTS INDEX:
A. DOUBLE SUCTION ADAPTER PLATE (QTY. 1)*
B. RAM™ TWIST-LOCK SUCTION CUP (QTY. 2)
C. #10 X 3/4” SHEET METAL SCREW (QTY. 4)
D. #8-32 X ½” MACHINE SCREW (QTY. 4)*
E. #8-32 THIN NYLOCK NUT (QTY. 4)*
National Products, Inc. 8410 Dallas Ave S. Seattle, WA 98108 206-763-8361 www.rammount.com
A
B
C
RMR-INS-189
ASSEMBLE (A) ADAPTER PLATE WITH BOTH (B)
SUCTION CUPS USING (C) SCREWS AS SHOWN BELOW.
DO NOT OVER-TIGHTEN SCREWS.
ATTACH RAM BALL BASE TO (A) ADAPTER PLATE USING (D) SCREWS AND (E) NUTS.
THREAD ALL SCREWS AND NUTS BY HAND FIRST, THEN TIGHTEN USING PHILLIPS
HEAD SCREWDRIVER AND ADJUSTABLE WRENCH.
BALL BASE NOT INCLUDED
IN ALL KITS: RAM-B-202U
FOR PROPER SUCTION, MAKE
SURE SURFACE HAS NO CRACKS
OR SCRATCHES, AND HAS BEEN
THOROUGHLY CLEANED.
D
E
C
C
C
C
D
D
E
*ADAPTER PLATE AND HARDWARE QUANTITIES MAY VARY BASED ON KIT PURCHASED
ALTERNATE
ADAPTER PLATE
ALTERNATE
ADAPTER PLATE
RAM DOUBLE SUCTION CUP BASE ASSEMBLY INSTRUCTIONS
PARTS INDEX:
A. DOUBLE SUCTION ADAPTER PLATE (QTY. 1)*
B. RAM™ TWIST-LOCK SUCTION CUP (QTY. 2)
C. #10 X 3/4” SHEET METAL SCREW (QTY. 4)
D. #8-32 X ½” MACHINE SCREW (QTY. 4)*
E. #8-32 THIN NYLOCK NUT (QTY. 4)*
National Products, Inc. 8410 Dallas Ave S. Seattle, WA 98108 206-763-8361 www.rammount.com
A
B
C
RMR-INS-189
ASSEMBLE (A) ADAPTER PLATE WITH BOTH (B)
SUCTION CUPS USING (C) SCREWS AS SHOWN BELOW.
DO NOT OVER-TIGHTEN SCREWS.
ATTACH RAM BALL BASE TO (A) ADAPTER PLATE USING (D) SCREWS AND (E) NUTS.
THREAD ALL SCREWS AND NUTS BY HAND FIRST, THEN TIGHTEN USING PHILLIPS
HEAD SCREWDRIVER AND ADJUSTABLE WRENCH.
BALL BASE NOT INCLUDED
IN ALL KITS: RAM-B-202U
FOR PROPER SUCTION, MAKE
SURE SURFACE HAS NO CRACKS
OR SCRATCHES, AND HAS BEEN
THOROUGHLY CLEANED.
D
E
C
C
C
C
D
D
E
*ADAPTER PLATE AND HARDWARE QUANTITIES MAY VARY BASED ON KIT PURCHASED
ALTERNATE
ADAPTER PLATE
ALTERNATE
ADAPTER PLATE