Owner's manual

Automatic High Beam Headlamp Control —

If Equipped

The Automatic High Beam Headlamp Control system

provides increased forward lighting at night by automat-

ing high beam control through the use of a digital camera

mounted on the inside rearview mirror. This camera

detects vehicle specific light and automatically switches

from high beams to low beams until the approaching

vehicle is out of view.

NOTE:

• Automatic High Beam Headlamp Control can be

turned on or off using the Uconnect® System, refer to

“Uconnect® Settings” in “Understanding Your Instru-

ment Panel” for further information.

• Broken, muddy, or obstructed headlights and taillights

of vehicles in the field of view will cause headlights to

remain on longer (closer to the vehicle). Also, dirt, film,

and other obstructions on the windshield or camera

lens will cause the system to function improperly.

If the windshield or Automatic High Beam Headlamp

Control mirror is replaced, the mirror must be re-aimed

to ensure proper performance. See your local authorized

dealer.

To Activate

1. Select “Automatic High Beams — ON” through the

EVIC. Refer to “Electronic Vehicle Information Center

(EVIC)/Customer-Programmable Features” in “Un-

derstanding Your Instrument Panel” for further infor-

mation.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163