Owner's manual

TRI-FOLD TONNEAU COVER-IF EQUIPPED
Tri-Fold Tonneau Cover — If Equipped
Your vehicle may be equipped with a Tri-Fold Tonneau
Cover which consists of different features:
• Easy Tri-Fold cover
• Tonneau fore aft locator
• Crosscar inside bed locator
• Front and rear clamps
• Stowage strap
• Locking Capability
NOTE: The Tonneau Cover can be folded up and secured
at the front of the box without removing completely.
Tri-Fold Tonneau Cover Removal
To remove the Tonneau Cover follow the following steps:
1. Lower the tailgate.
2. Pull down on the clamp on both driver and passenger
sides.
3. Pick up on the cover and fold it back into the second
panel.
4. Be sure both clamps are pushed completely down.
5. Pick up on the cover and fold it back into the third
panel.
6. Once in the third panel position pull down on the
clamp on both sides.
7. Be sure to clip both straps together to insure the cover
stays together.
8. With two people remove the cover.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247