Owner's manual

CAUTION!

Failure to follow these cautions can cause damage to

the heating elements:

•

Use care when washing the inside of the rear

window. Do not use abrasive window cleaners on

the interior surface of the window. Use a soft cloth

and a mild washing solution, wiping parallel to the

heating elements. Labels can be peeled off after

soaking with warm water.

• Do not use scrapers, sharp instruments, or abrasive

window cleaners on the interior surface of the

window.

• Keep all objects a safe distance from the window.

5. Modes

The airflow distribution mode can be adjusted so air

comes from the instrument panel outlets, floor outlets,

demister outlets and defrost outlets. The Mode settings

are as follows:

• Panel Mode

Air comes from the outlets in the instrument

panel. Each of these outlets can be individually

adjusted to direct the flow of air. The air vanes of

the center outlets and outboard outlets can be moved up

and down or side to side to regulate airflow direction.

There is a shut off wheel located below the air vanes to

shut off or adjust the amount of airflow from these

outlets.

• Bi-Level Mode

Air comes from the instrument panel outlets and

floor outlets. A slight amount of air is directed

through the defrost and side window demister

outlets.

UNDERSTANDING YOUR INSTRUMENT PANEL 321