Owner's manual

For additional information on the appropriate use of each

transfer case mode position, see the information below:

Rear-Wheel Drive High Range - This range is for normal

street and highway driving on dry hard surfaced roads.

Four-Wheel Drive High Range - This range locks the

front and rear driveshafts together forcing the front and

rear wheels to rotate at the same speed. Additional

traction for loose, slippery road surfaces only.

Neutral - This range disengages the front and rear

driveshafts from the powertrain. To be used for flat

towing behind another vehicle. Refer to “Recreational

Towing” in “Starting and Operating” for further infor-

mation.

Four-Wheel Drive Low Range - This range locks the front

and rear driveshafts together forcing the front and rear

wheels to rotate at the same speed. Additional traction

and maximum pulling power for loose, slippery road

surfaces only. Do not exceed 25 mph (40 km/h).

CAUTION!

Do not use 4L (Low) range when operating the

vehicle on dry pavement. Driveline hardware dam-

age can result.

STARTING AND OPERATING 385