Owner's manual

11. Shift the transmission into PARK or place manual

transmission in gear (NOT in Neutral). On 8-speed

transmissions the shifter will automatically select

PARK when the engine is turned off.

12. Turn the ignition switch to the OFF position, then

cycle the key or the Keyless Enter-N-Go button to the

RUN position and back to the OFF position. Remove

the key fob from the ignition switch.

13. Attach the vehicle to the tow vehicle using a suitable

tow bar.

14. Release the parking brake.

NOTE: With electronic shift transfer case:

• Steps 2 through 4 are requirements that must be met

prior to pressing the NEUTRAL (N) button, and must

continue to be met until the shift has been completed.

If any of these requirements are not met prior to

pressing the NEUTRAL (N) button or are no longer

met during the shift, the NEUTRAL (N) indicator light

will flash continuously until all requirements are met

or until the NEUTRAL (N) button is released.

• The ignition switch must be in the ON/RUN position

for a shift to take place and for the position indicator

lights to be operable. If the ignition switch is not in the

ON/RUN position, the shift will not take place and no

position indicator lights will be on or flashing.

• A flashing NEUTRAL (N) position indicator light

indicates that shift requirements have not been met.

Shifting Out Of NEUTRAL (N)

Use the following procedure to prepare your vehicle for

normal usage.

1. Bring the vehicle to a complete stop, leaving it con-

nected to the tow vehicle.

2. Firmly apply the parking brake.

STARTING AND OPERATING 567